基于全球分布的地震观测数据估计0S0模态的特征频率及品质因子     

周丰森  王迪晋  旦增 《大地测量与地球动力学》2019,39(10):1013-1016

选取2011-03-11日本MW9.3地震后全球地震台站记录的约220 h波形数据，基于一定的判断准则，筛选出质量较高的448个垂向观测数据，采用频域AR方法对0S0模态的特征频率和品质因子进行估值，并以信噪比为权重进行加权平均，得到特征频率f=0.814 658 4±5.3×10-7，品质因子Q=5 586±12。该结果与已有研究成果相比精度更高，有助于约束现有地球介质密度和衰减模型，使其更接近真实地球。  相似文献   

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean     

Jason D. Tambie  Madiha Farag-Miller  Keith Miller  Bheshem Ramlal  Michael Sutherland 《Marine Geodesy》2019,42(3):227-245

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.  相似文献   

Global method for stability analysis of anchored slopes     

Tan Zhang  Hong Zheng  Cong Sun 《国际地质力学数值与分析法杂志》2019,43(1):124-137

Based on the global method, an approach is proposed to consider the effect of anchor reinforcement on slope stability, where equilibrium conditions are formulated in terms of the whole slip body. Anchor pre-tension is assumed to be undertaken by the whole slip body instead of individual slices, causing internal force within slope more realistic. Meanwhile, the optimization model for locating the critical slip surface is of weak nonlinearity and easy to solve using the conventional optimization procedures. The effects of anchoring orientation and position are thoroughly investigated, and interesting results are obtained.  相似文献   

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method     

Omid Ghaffaripour  Golnaz A. Esgandani  Arman Khoshghalb  Babak Shahbodaghkhan 《国际地质力学数值与分析法杂志》2019,43(11):1919-1955

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

VIIRS/DNB夜间灯光月度产品插补方法对比——以北京为例     

陈慕琳  蔡红艳 《地理科学进展》2019,38(1):126-138

新一代VIIRS/DNB(Visible Infrared Imaging Radiometer Suite Day/Night Band)夜间灯光数据因其具备更精细的时空分辨率、数据不存在饱和现象、不同年份数据可比性强等优点而迅速代替DMSP/OLS(Defense Meteorological Satellite Program's Operational Linescan System)夜间灯光数据成为新的研究热点。但由于杂散光的污染,VIIRS/DNB夏季数据数值缺失严重,致使数据在空间和时间上不连续,因此,插补缺失数据成为后续应用的前提。鉴于此,论文从插补结果异常值、与参照值对比、计算性能三个方面,系统比较了三次样条插值(样条)、三次Hermite插值(Hermite)、灰色预测模型(GM)、三次指数平滑法(指数)4种插补方法的适用性,以期为插补VIIRS/DNB夜间灯光数据提供方法选择的依据。研究结果表明：①异常值比较方面,Hermite法未出现异常值,另外3种算法仅出现少量异常值(0.02%~1.34%);②与参照值的对比方面,Hermite法与参考值接近程度最高,GM接近程度最低,样条法和指数法介于两者中间;③算法性能比较方面,4种方法都具备计算简单、容易编程的特点,但指数法的算法时长是另外3种方法的10倍以上。因此,综合多方表现,当插补月份前后两侧均有足够长的原始数据时,插补效果好、计算速度快、不会出现过冲现象的Hermite法最适宜,样条法次之;当插补月份仅单侧有足够长的数据时,适宜采用指数法(插补效果好、计算速度较慢)或GM(插补效果偏低、计算速度快)进行插补。  相似文献   

冰冻圈服务综合区划理论与方法     

林浩曦  黄金川  效存德  漆潇潇  陈云谦 《地理学报》2020,75(3):631-646

冰冻圈是全球气候系统的主要圈层之一,既具有不可替代的气候效应,又维系着寒旱地区社会经济和自然生态系统良好运行,而中国是中低纬度地区冰川、积雪、冻土发育程度最高的国家。长期以来,针对冰冻圈“致害性”的研究众多,而聚焦冰冻圈服务的“致利性”研究则相对滞后,在此背景下着眼于人类福祉的冰冻圈服务识别与综合区划研究成为冰冻圈科学、人地系统可持续发展等的关键科学问题之一,也是目前迫切需要开展的研究方向。首先,确定以地域分异规律理论、人地关系地域系统理论、集合论和信息编码论等跨学科理论为研究基础;尔后,构建面向综合区划研究的冰冻圈服务分类体系,先以供需均衡模型为核心进行单项服务重要性空间识别,再以服务最大化模型为指导,通过区位熵算法判定冰冻圈主导服务的空间分布;最后,以三维魔方展开法为核心制定冰冻圈服务综合区划方案,将研究区划分多重空间层级、彼此独立完整、相互联系密切的冰冻圈服务单元。综上,形成综合自然供给和人文需求因素且适应地区特色的冰冻圈服务空间识别与综合区划技术体系和方法流程,为冰冻圈服务供给与社会经济发展需要架起一座桥梁,是满足国家重大战略需求和合理利用冰冻圈服务的必由之路。  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

利用旋转平台模拟双河口羽流相互作用的研究     

戴娟娟  袁野平  宋浩宸 《海洋与湖沼》2020,51(5):1108-1117

本文通过旋转平台实验室实验的方法,探讨了双河口情况下两个羽流将如何发生相互作用。在研究中,提出了一种新颖的技术对河口羽流的各切面流场进行测量,来获得河口羽流多个平面的速度场及涡度场,并基于此模拟了双河口羽流系统的准三维结构。通过对不同入流速度下的双河口羽流流场演变过程和内部结构进行了一系列对比研究,以期揭示上游河流的入流如何影响下游河口涡旋的形成及在羽流相互作用情形下各个羽流的演变。实验结果表明:随着上游入流流量的增加,上游羽流形成的沿岸流对下游河口涡旋沿岸迁移的促进和离岸输运的抑制作用将更加显著。特别是在上游入流流量等于或大于下游入流流量的情况下,下游羽流河口涡旋的体积增长明显较单一河口情况放缓。在上游入流流量较大的情况下,下游原有河口涡旋被推向更下游位置,在远离河口的位置形成另一个河口涡旋。在垂直方向上,我们可以观察到高上游入流流量条件下的下游河口涡旋的深度较小,更有利于形成三层流体的情况。本研究对多河口近海流域的营养盐及污染物的输运情况等社会和生态问题的研究有着重要的意义。  相似文献   

Wave Attenuation Performance and the Influencing Factors of A Lower Arc-Plate Breakwater     

LI Xue-yan  WANG Qing  YOU Zai-jin  GUO Wei-jun  ZHANG Jun-bin  ZHAN Chao  ZHANG Zhi-chen  WANG Li-xue  LI Qin 《中国海洋工程》2020,(1):89-98

Comprehensive experimental and numerical studies have been undertaken to investigate wave energy dissipation performance and main influencing factors of a lower arc-plate breakwater. The numerical model, which considers nonlinear interactions between waves and the arc-plate breakwater, has been constructed by using the velocity wave- generating method, the volume of fluid (VOF) method and the finite volume method. The results show that the relative width, relative height and relative submergence of the breakwater are three main influencing factors and have significant influence on wave energy dissipation of the lower arc-plate open breakwater. The transmission coefficient is found to decrease with the increasing relative width, and the minimum transmission coefficient is 0.15 when the relative width is 0.45. The reflection coefficient is found to vary slightly with the relative width, and the maximum reflection coefficient is 0.53 when the relative width is 0.45. The transmission and reflection coefficients are shown to increase with the relative wave height for approximately 85% of the experimental tests when the relative width is 0.19 0.45. The transmission coefficients at relative submergences of 0.04, 0.02 and 0 are clearly shown to be greater than those at relative submergences of 0.02 and 0.04, while the reflection coefficient exhibits the opposite relationship. After the wave interacts with the lower arc-plate breakwater, the wave energy is mainly converted into transmission, reflection and dissipation energies. The wave attenuation performance is clearly weakened for waves with greater heights and longer periods.  相似文献